{"product_id":"vitcas-vitcashrp-heat-resistant-plaster","title":"Vitcas shrp Heat Resistant Plaster","description":"\u003cp\u003eHigh temperature smooth finish plaster - 10 kg. Protection up to 650C(1200F)Vitcas Heat Resistant Plaster is a replacement material for gypsum plaster where the temperatures are too high for gypsum plaster to stay on the wall.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo not treat as Gypsum Plaster.\u003c\/strong\u003eFor use around the opening of cassette fireplaces (sometimes called hole in the wall fires) and adjacent to wood burning stoves and range cookers where the area of the wall is subjected to intense heat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePreparation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe plaster should be used in the areas subject to intense heat approx 3 m (10 ft) around the fire opening. Maximum recommended thickness of the material is 5 mm. Remove all traces of old render and plaster on the wall or part of wall to be treated. Re-render using\u003cstrong\u003eVITCASFIREPLACE RENDER\u003c\/strong\u003eprior to applying\u003cstrong\u003eVitcas Heat Resistant Plaster\u003c\/strong\u003e. It is important to ensure that the Vitcas Fireplace Render is fully dried prior to applying Vitcas Heat Resistant Plaster. The Vitcas Fireplace Render should be left to dry for at least 3 days in temperatures above 18 degrees centigrade and for longer if moisture is still present as apparent by the colour of the material. If possible apply heat after day one ie light the fire or use another type of heater. Prepare the area by coating with undiluted Vitcas PVA Adhesive Sealer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVITCAS Heat Resistant Plaster \u0026amp; High Temperature Plasterboard\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you need to apply Heat Resistant Plaster onto a board then we ONLY recommend using\u003cstrong\u003eVITCASHIGH TEMPERATURE PLASTERBOARD\u003c\/strong\u003ewhich is designed for this purpose.\u003c\/p\u003e\n\u003cp\u003eFor plastering the boards whith Vitcas Heat Resistant Plaster should be fixed with the rough reverse face and the board sealed with neat PVA before starting to plaster when the PVA becomes tacky.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe material should be mixed with cold tap water to a useable consistency with a plaster mixer \/ drill attachment. There should be no traces of ordinary Portland cement or gypsum plaster on the tools or in the mixing buckets. It is best to mix the plaster in the bucket in which it is supplied.\u003c\/p\u003e\n\u003cp\u003eTake care not to mix the material too wet.\u003c\/p\u003e\n\u003cp\u003eAs a guide the amount of water required is approximately 200 ml per kilo. A thickness of approx 3-6 mm should be applied. It is important that the plaster is applied evenly i.e. no featheredges. The surface finish must be obtained during flotation with the trowel. The material cannot be sanded when dry. Due to the surface being dense and non-porous when dry it is not suitable for finish skimming. Any minor cracks can be repaired using\u003cstrong\u003eVITCAS HEAT RESISTANT FILLER\u003c\/strong\u003e. When dry the finished surface forms a very hard heat resistant surface that can be painted over as required. VITCAS HEAT RESISTANT PLASTER must be allowed to air dry for at least 3 days before lighting fire.\u003c\/p\u003e\n\u003cp\u003eCoverage: 20 kg bucket will cover approximately 2 m2 (20 ft2) at a thickness of 6 mm (1\/4)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStorage\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKeep any unused material dry and store in a cool dry place away from children and pets. Warning: Do not breathe the dust. In case of contact with skin and eyes rinse immediately with plenty of water and seek medical advice. After contact with skin, wash with water Wear suitable gloves and eye face protection. Keep out of reach of children.\u003c\/p\u003e","brand":"Vitcas","offers":[{"title":"10KG","offer_id":52008529002838,"sku":"VITCASHRP-10KG","price":39.8,"currency_code":"GBP","in_stock":true},{"title":"20KG","offer_id":53064602616150,"sku":"VITCASHRP-20KG","price":59.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0928\/9282\/3894\/files\/mini2_picture_258.jpg?v=1766524642","url":"https:\/\/www.fpdlsupplies.co.uk\/products\/vitcas-vitcashrp-heat-resistant-plaster","provider":"FPDL Supplies","version":"1.0","type":"link"}